After unpacking the unit, check all the parts are
in good conditions and that no item is missing.
Otherwise, contact the dealer from which you
purchased your pellet boiler.
Before installation, it's better doing an accurate
wash of all the system pipes in order to remove
any residues that could compromise the correct
working of the boiler. If you do not use the boiler
for a long time it's recommended to carry out the
following operations:
- unplug the power supply
- close the water taps of both the heating
system and the sanitary system
- if there is a risk of frost, empty the heating
and sanitary system.
The pellet boiler extraordinary maintenance
should be carried out at least once a year. This
operation should be scheduled in advance
with the Technical Assistance Service and
shall be at the Client's expense.
For safety reasons, it is advisable to remember that:
- during normal operation of the product the hearth
door must always be closed
- always keep the fuel tank lid
- the pellet boiler should not be used by children or
handicapped people not being assisted
- do not touch the pellet boiler with wet parts of
the body and/or bar feet
- avoid direct contact with appliance parts during
normal operation tend to overheat
- the handle for the cleaning of the boiler should be
used only when the boiler is cold
- it is forbidden to modify the safety or adjustment
devices without the manifacture's authorisation or
indication
- do not pull, disconnect or twist the electric
cables coming out of the boiler even when it is
disconnected from the mains
- it is recommended to place the power cord in a
way that does not come into contact with hot parts
of the
- the mains plug must be accessible after installation
- avoid covering or reducing the combustion air
duct, which is essential for correct combustion
- keep all the packing elements out of the reach of
children or handicapped people not being assisted
2
- for any problem contact your dealer or qualified
and authorized personnel, and in case of repair
require original spare parts
- periodically check and clean the flue gas exhaust
ducts
- the accumulation of unburnt pellets in the
burner after any misfires must be removed before
proceeding with a new ignition
- do not use flammable liquids to the ignition
- during the filling does not bring the bag of pellets
in contact with the product
- check that the electrical system is adequate
- all the local and national laws and European
Standards must be met when installing the unit
- the unit cannot be used as an incinerator. Do not
use fuels other than pellets
- keep the pellet and flammable materials at a
suitable distance
In the event of a fire, disconnect the power
supply, use an extinguisher and call the fire
fighters if necessary. After that contact the
Authorised Assistance Centre.
Responsibility
With the delivery of the present manual, we decline
all responsibility, both civil and penal, for accidents
deriving from the partial or total lack of observance
of the instructions contained herein.
We decline every responsibility derived from
improper use of the Boiler, from incorrect use by
the user, from unauthorized modifications and/or
repairs, from the use of replacement parts that are
not original for this model.
The manufacturer declines every civil or penal,
direct or indirect responsibility due to:
• Lack of maintenance;
• Failure to observe the instructions contained in
the manual;
• Use in non-conformity with the safety
directives;
• Installation in non-conformity with the norms
in force in the country;
• Installation by unqualified or untrained
personnel;
• Modifications and repairs not authorized by
the manufacturer;
• Use of non-original replacement parts;
• Exceptional events.