Samsung DVD-VR370 Mode D'emploi page 64

recording
DELETING THE TIMER LIST
Follow these directions to delete a title from the timer record list.
1. With the unit in Stop mode, press the MENU button.
Press the ▲▼ buttons to select Timer, then press the OK button.
2.
Press the ▲▼ buttons to select the Timer List, then press the OK button.
3.
Press the ▲▼ buttons to select the number of the Timer List you
4.
want to delete, and then press the OK button.
•
The Edit and Delete items are displayed.
Press the ▲▼ buttons to select Delete, then press the OK button.
5.
•
You will be prompted with the delete confi rm message such as
("Do you want to erase "No.01"?").
Press the ◄ ► buttons to select OK, then press the OK button.
6.
•
The selected title will be deleted from the list.
7. Press the EXIT button after fi nishing the operation.
The menu screen will disappear.
M

You can not delete programmes that are currently being recorded.
USING THE SHOWVIEW FEATURE
Before presetting your DVD Recorder & VCR.
• Switch on both the television and your DVD Recorder & VCR.
• Check that the date and time are correct. Up to twelve programmes can be preset
1. With the unit in Stop mode, press the MENU button.
Press the ▲▼ buttons to select Timer, then press the OK button.
2.
Press the ▲▼ buttons to select Timer-ShowView, then press
3.
the OK button.
•
A message is displayed to allow you to enter the ShowView code.
4. Press the number buttons to enter the code of the programme
that you want to record in your television magazine.
•
If you want to correct the ShowView code that you are entering:
- Press the ◄ button until the digit to be corrected is cleared.
- Enter the correct digit.
5. Press the OK button.
•
The information concerning the programme is displayed.
•
When using the ShowView function for the fi rst time with stored
stations, the programme number fl ashes. This one time, you must
enter the PR number manually by pressing the ▲▼ buttons.
6. If the programme and times are correct, press the OK button.
64_ recording
XCV KL
DVD-VR375 only
Timer List
No. Media Date Start End Prog. Mode
01 --- --/-- --:-- --:-- ---- ---
02 --- --/-- --:-- --:-- ---- ---
Do you want to erase "No. 01"?
03 --- --/-- --:-- --:-- ---- ---
04 --- --/-- --:-- --:-- ---- ---
Cancel
OK
05 --- --/-- --:-- --:-- ---- ---
06 --- --/-- --:-- --:-- ---- ---
m Move sOk rReturn
XCV KL
DVD-VR375 only
Timer
Title List
Timer - Standard
Timer - ShowView
Timer
Timer List
Edit
Dubbing
Disc
Setting
Setup
> Move sOk rReturn
Timer - ShowView
Title List
Set ShowView code number. [0~9]
Timer
Edit
Dubbing
Standard
Disc
Setting
Setup
◄ Move sOk rReturn
12:00
PDC
Edit
/VPS
--
--
--
--
--
--
eExit
12:00
eExit
12:00
eExit