Samsung DVD-VR370 Mode D'emploi page 27

AV RECEIVER CONNECTIONS
To take full advantage of the movie theatre experience that DVD offers, you may want to connect your DVD
Recorder & VCR to a complete Surround Sound system, including an A/V Receiver and six Surround Sound
speakers.
If your A/V receiver is equipped with a Dolby Digital Decoder, you have the option to bypass the DVD Recorder &
VCR's built-in Dolby Digital Decoder.
Use the Digital Audio Out connection below.
To enjoy Dolby digital or DTS sound, you must set up the audio settings. (See page 35)
Manufactured under license under U.S. Patent #: 5,451,942 & other U.S. and worldwide patents issued & pending.
DTS and DTS Digital Out are registered trademarks and the DTS logos and Symbol are trademarks of DTS, Inc.
© 1996-2007 DTS, Inc. All Rights Reserved.
Manufactured under licence from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
1. Connect a Digital Audio coaxial cables from the Digital Audio Out jacks on the rear panel of the DVD
Recorder & VCR to their corresponding Digital Audio Input jacks on your A/V Receiver :
To Digital Audio Input of an A/V
Receiver with a Dolby, MPEG2
or DTS Digital Decoder
Rear(L) Rear(R)
Front(L) Front(R)
Subwoofer Centre
English _27