Samsung DVD-VR370 Mode D'emploi page 34

system setup
AV1 Output
You can enjoy high quality image through Video or RGB connections.
Only one of these signals can be selected at one time.
•
Video : Video output is available connecting component
(Y, P
B
•
RGB : RGB video output is available connecting scart
jack(AV1).
When you set "AV 1 Output" to "RGB", you
should set "Component Out" and "Progressive" to "Off".
Component Out
Selects whether or not to output video signals from the COMPONENT VIDEO OUT jacks.
•
On : Outputs the component video signals. Select this when you
want to view progressive signals.
•
Off : Outputs no signals.
M

When you set "AV 1 Output" to "RGB," you cannot set "Component
Out" to "On."

When you connect the recorder to a monitor or projector via only the
COMPONENT VIDEO OUT jacks, do not select "Off", as the picture
will not appear.
Progressive Scan
This function is available when video output is component. This
setting enables you to select a desired progressive mode. To view
"Progressive scan mode", fi rst connect the component cable. (See
page 24) Be sure the Component cables are connected properly.
•
On
•
Off
M

When the HDMI cable (not supplied) is connected, "Off" can not be
selected. (DVD-VR375 only)

Progressive setting is only available when the Recorder is in stop mode.
34_ system setup
, P ) or scart jack(AV1) .
R
Video
Title List TV Type : 4:3 Letter Box
Picture Control : Standard
Timer
AV 1 Output : Video
Video
✔
Edit
Component Out : On RGB
Progressive : Off
Dubbing
Disc
Setting
Setup
> Move sOk rReturn
Video
Title List TV Type : 4:3 Letter Box
Picture Control : Standard
Timer
AV 1 Output : Video
Edit
Component Out ✔ : On
On
Progressive : Off
Off
Dubbing
Disc
Setting
Setup
> Move sOk rReturn
Video
Title List TV Type : 4:3 Letter Box
Picture Control : Standard
Timer
AV 1 Output : Video
Edit
Component Out : On
Progressive : Off On
Dubbing
✔
Off
Disc
Setting
Setup
> Move sOk rReturn
12:00
eExit
12:00
eExit
12:00
eExit