Leica Microsystems DM2000 Manuel D'utilisation page 128

8. Operation
Standard mode
The toggle key is off.
The key for the current objective lights green.
The lateral function keys can be used to
sequentially swing in the objectives. If the lat-
eral function key is
succession, one objective is skipped and the
subsequent objective is approached. The key
belonging to this objective now lights green.
Standard mode active and objective 1 swung in
50
Toggle mode
Based on the standard mode, a brief push of the
toggle key switches to the toggle mode. The tog-
gle key now lights green.
The lower of the previously learned magnifica-
pressed twice in tions is selected and the corresponding key also
lights green. The key of the second learned ob-
jective lights yellow.
Toggle
Toggle mode active, change between objective 2 and 4
possible, objective 2 swung in
The lateral function keys can now be used to
toggle between these two objectives. In this
case, it does not matter which one of the lateral
function keys is pressed.
When changing to the other objective, the color
display also changes so that the key of the cur-
rent objective always lights green and the other
objective key lights yellow.
Pressing the toggle key again switches back to
the standard mode.
The standard mode is also activated if one of the
objective keys is pressed. The corresponding
objective is then approached and the objectives
learned for the toggle mode are retained.
Toggle