Publicité
Les langues disponibles
Les langues disponibles
6.8 Lambda Plate Compensator*
• Raise the condenser to it's upper stop posi-
tion.
• Remove the DLF filter magazine from the base
if present.
• Attach the lambda plate compensator to the
base.
6.9 DIC Prisms
The condenser prisms have already been
mounted at the factory.
To adjust the condenser prisms during first use
→ p. 37.
To retrofit DIC prisms, see → p. 75.
Without zoom magnification, for 1-chip cameras only:
C-mount adapter 1 x HC
C-mount adapter 0.63 x HC
C-mount adapter 0.5 x HC
C-mount adapter 0.35 x HC
With zoom magnification (vario TV adapter) for 1-3 chip cameras:
C-mount, 0.32-1.6 x HC
B-mount (ENG), 0.5-2.4 x HC (1/2-inch)
+)
from zoom factor 0.42 x only!
Without zoom magnification, for 1-3 chip cameras:
C-mount adapter 1 x
B-mount adapter 1 x
B-mount adapter 1.25 x
F-mount adapter 1 x
F-mount adapter 1.25 x
Plus (Essential Requirement): TV optics 0.5 x HC
6. Assembling the Microscope
6.10 Optional Accessories
Camera
A camera can be connected via an adapter.
• Attach the adapter to the top port of the tube
and fasten it tightly with the side clamping
screw.
• Screw on the camera.
Note:
The size of the camera chip and the mounting
system (B-mount, C-mount, etc.) must be con-
sidered when choosing an adapter.
See table.
Recorded picture diagonal in mm for
1 inch
2/3 inch
1/2 inch
camera
camera
camera
16
11
8
-
17.5
12.7
-
-
16
-
-
-
-
-
19
-
-
16-3.3
-
-
16
-
-
16
-
17.5
-
-
-
16
-
17.5
-
1/3 inch
camera
6
9.5
12
17.1
+)
-5
18-3.8
-
12
12
-
12
-
31
Publicité
