Functions And Displays; Software Version Displayed By Leds; Hybrid Module Is Transmitting" Displayed By Leds; Test Displayed By Led - Abus FUMO50110 Manuel D'installation Et D'utilisation

Functions and displays

Functions and displays

Software version displayed by LEDs

The software version of the hybrid model is indicated by the LEDs immediately after the power
supply is connected.
You can also find the software version in the alarm panel's info menu.
Installer mode -> Info -> Hybrid module
Note
User menu -> Info -> Hybrid module
• The red left-hand TX LED indicates the major software version.
• The red right-hand TEST LED indicates the minor software version.
Example:
Red left TX LED flashes once
Software version "1.1"
• The red left-hand TX LED then flashes a few times in quick succession. If the red TX LED is
flashing, the hybrid module is transmitting.

"Hybrid module is transmitting" displayed by LEDs

Every time the hybrid module transmits, the red left-hand TX LED flashes.

Test displayed by LED

The TEST LED is only used for factory testing.
82 | EN
Red right TEST LED flashes once