Loudspeaker Connection - Abus FUMO50110 Manuel D'installation Et D'utilisation

Installation

Loudspeaker connection

You can only connect a loudspeaker with an impedance of >= 16 ohms at this terminal.
Loudspeakers are not sounders or output devices of intrusion and hold up alarms as
described in EN50131-4.
Danger
However, loudspeakers can emit alarm tones. Loudspeakers also emit warning tones
and other alert tones e.g. when arming and disarming the alarm system.
You can set the volume of the different signal tones on the loudspeaker in the user
menu.
Note
User menu -> Configuration -> Volume settings ->
These volume settings affect the volume at the alarm panel, all internal sounders
(FUSG50110) and the loudspeaker reproduction at the hybrid module.
Note
74 | EN
Image 11
Operator tones
Info tones 0-10
Alarm tones 0-10
0-10