Housing and wall tamper switches
• Check that both switches function properly.
• Exit installer mode on the alarm panel to do this.
Note that after exiting the installer mode, the alarm panel will execute the pro-
grammed alarm responses to tampering.
Danger
Inform the communication recipient about the test to be carried out to prevent fault re-
sponses, or deactivate communication for this test.
Danger
Make sure that any loud sounds emitted by sounders belonging to this system do not
startle you (e.g. causing you to fall off a ladder) or cause an annoyance.
Danger
• Open and close the tamper switch.
• Check if the correct notifications are shown on the alarm panel and if the corresponding
alarm reactions are triggered.
Software version of the hybrid module
• Installer mode -> Info -> Hybrid module
• User menu -> Info -> Hybrid module
Installation
81 |
EN