Volume Of The Signal Tones Of The Connected Loudspeaker; Software Update; Usb Port; Boot - Abus FUMO50110 Manuel D'installation Et D'utilisation

Volume of the signal tones of the connected loudspeaker

The volume of the signal tones can be configured separately for each group.
User menu -> Configuration -> Volume settings ->
Operator tones
Info tones
Alarm tones 0-10
These volume settings affect the volume of the alarm panel, all internal sounders
(FUSG50110) and the loudspeaker reproduction at the hybrid module.
Note

Software update

A software update is performed via the USB port.
Note
Only for the installer.
Should a software update ever be required on site, please contact our technical sup-
Note
port.
They will provide you with the corresponding software and instruct you on the update
process.

USB port

Connect the USB cable from the PC/computer for the software update.

BOOT

These contacts are required during the software update in order to access programming mode.
A jumper must not be connected to the 2 pins during normal operation.
Danger
0-10
0-10
Functions and displays
83 | EN