How To Start The Machine; How To Stop The Machine - GOLDONI TWIST 5 Notice D'utilisation Et D'entretien

GOLDONI S.p.A.

How to start the machine

DANGER
The machine could respond in a
dangerous way if the Gear Stop lever is
depressed too sharply.
IMPORTANT
Before starting the machine, make sure
you become familiar with its main
controls: transmission, PTO, diff lock,
how to stop the engine and the Gear
Stop.
IMPORTANT
Lengthy clutch disengagements could
wear out the thrust bearing.
Allow the engine to idle.
Release the Gear Stop lever.
Select the transmission ratio (consult the
Gearbox chapter).
Gradually depress the Gear Stop lever to
disengage the (safety) linkage in the
device.
Gradually accelerate the engine.
EN Inglese

How to stop the machine

Allow the engine to idle.
Release the Gear Stop lever.
Move the gearshift lever to the idle position.
Remember to disengage the PTO if used.
91
TWIST
OPERATING INSTRUCTIONS