Wheels; Tyres; Table Of Tyre Inflation Pressures - GOLDONI TWIST 5 Notice D'utilisation Et D'entretien

GOLDONI S.p.A.

WHEELS

Tyres

WARNING
The tyres must only be changed by competent persons in possession of the necessary
equipment and technical know-how.
DANGER
It is absolutely essential to avoid:
Improper use.
Overloads (even localized).
Unsuitable pressure.
Unsuitable rim and tyre couplings.
Tyre life and performance depends on use of the correct operating pressure: if the pressure is too low,
the tyre will quickly wear out while an excessive pressure will reduce the lugging power and make the
wheels more liable to slip.
A correct tyre pressure depends on various factors:
The operating conditions.
Machine load.
Machine model.
The tyre make.
The tyre size.
You are therefore advised to consult your dealer or the tyre manufacturer.
The values given below are only approximate as they depend on the conditions described above:

Table of tyre inflation pressures

Tyres
4.00x8"
4.00x10"
5.00x10"
EN Inglese
Bar (MAX)
1,2
1,2
1,2
99
kPa (MAX)
120
120
120
TECHNICAL SPECIFICATIONS
TWIST