Controls And Instruments; Engine Controls; Gear Stop; Handlebar Controls - GOLDONI TWIST 5 Notice D'utilisation Et D'entretien

GOLDONI S.p.A.

CONTROLS AND INSTRUMENTS

Engine controls

See engine's operation
manual.

Gear Stop

The Gear Stop is a safety system that comprises
two levers to be operated in sequence.
To move the lever
lever first.
When in the released position with the lever
raised, the clutch is disengaged, the two-wheeled
is at a standstill and, if on, the engine will not
switch off.
When in the work position with the lever lowered,
the clutch is engaged, the two-wheeled enbloc
with the gearbox and with the PTO if engaged.
Accidental release of the handlebars or the Gear
Stop allows the clutch to can be disengaged and
the two-wheeled tractor to consequently stop.
WARNING
The operation of the Gear Stop should
always be performed gradually to avoid
too rapid maneuvers.
EN Inglese
and maintenance
need to unlook the safety

Handlebar controls

PTO control rod
Reverse shuttle
reverse selection.
Vertical handlebar release lever
Speed selector rod
85
TWIST
lever: forward, neutral,
OPERATING INSTRUCTIONS