Wheel Release; Track Width Adjustment - GOLDONI TWIST 5 Notice D'utilisation Et D'entretien

GOLDONI S.p.A.

Wheel release

The wheels can be released by means of the
lever to allow the machine to be moved when
the engine is off.
For this operations must disingaged the lever
and for the passing axle models, insert the pin
.

Track width adjustment

Models without differential
The wheel track can be changed by moving the
wheel disc on the axle shaft and fixing it in place
with the relative pin
EN Inglese
Models with differential
The wheel track can be changed by moving the
wheel disc on his flange.
Models with fitted wheel axle
The track width is adjusted by means of the
screw
94
TWIST
OPERATING INSTRUCTIONS