Hand Throttle; How To Start The Machine; How To Stop The Machine - GOLDONI MY SPECIAL SR Série Notice D'utilisation Et D'entretien

GOLDONI S.p.A.

Hand throttle

The throttle lever is located in the front right-hand
side of the machine.
Increase or decrease the engine rate by gradually
moving the lever.
EN Inglese

How to start the machine

DANGER
The machine could respond in a
dangerous way if the Gear Stop lever is
depressed too sharply.
IMPORTANT
Before starting the machine, make sure
you become familiar with its main
controls: transmission, PTO, diff lock,
how to stop the engine and the Gear
Stop.
IMPORTANT
Lengthy clutch disengagements could
wear out the thrust bearing.
Allow the engine to idle.
Release the Gear Stop lever.
Select the transmission ratio (consult the
Gearbox chapter).
Gradually depress the Gear Stop lever to
disengage the (safety) linkage in the
device.
Gradually accelerate the engine.

How to stop the machine

Allow the engine to idle.
Release the Gear Stop lever.
Move the gearshift lever to the idle position.
Remember to disengage the PTO if used.
97
MY SPECIAL SR
OPERATING INSTRUCTIONS