SETTING THE WEEK PROGRAM
[ Week program
* All days
Monday
Back
Change
In the week program, the days of the week and the
times are set when the evoCUT 4.0 should mow
automatically.
[All days] menu item
Select the [All days] menu item with the corresponding [arrow key] (Fig. 3 - 3) and confirm with the
[multifunction key right] (Fig. 3 - 5)).
Press the [down arrow key] (Fig. 3 - 3) until [Change] is active.
Select the required menu item with the corresponding [arrow key] (Fig. 3 - 3) and confirm with the
[multifunction key right] (Fig. 3 - 5).
Explanation of symbols
1)
Menu item
Menu item
2)
3)
[-]
[R]
Edge mowing
[M]
4)
Start time
5)
End time
6)
[0 - 9]
Fixed entry point
[?]
Automatic entry point
ENGLISH 10
10. SETTING THE WEEK PROGRAM
]
[X]
[X]
All days
Day of week
Mowing window deactivated
The evoCUT 4.0 mows on the right along the boundary able. After
mowing the edges, the evoCUT 4.0 continues mowing the marked-out
area.
Normal mowing
The evoCUT 4.0 departs from the base station at the selected time for
mowing.
The evoCUT 4.0 moves back to the base station at the selected time.
The evoCUT 4.0 departs from the selected entry point at the selected
time for mowing.
The entry points are changed automatically (recommended setting).
In menu item 1 [All days], the evoCUT 4.0 mows at
the set times every day.
The symbol [X] shows the currently active day of
the week.
In menu item 2 [Day of week], the evoCUT 4.0
mows at the set times on the set day of the week.
Use the corresponding [arrow key] (
to select the required menu item and confirm
each one with the [multifunction key right].
Observe the mowing result and mow as long as
necessary in order to obtain a well-kept lawn.
Fig. 3 - 3
)