Safety Regulations; Correct Use / General Safety Instructions; Safety And Protective Devices; Scope Of Supply - Solo evoCUT 4.0 Instructions D'emploi

SAFETY REGULATIONS, SCOPE OF SUPPLY, PRODUCT OVERVIEW

1.1 Correct use / General safety instructions

This machine is intended for mowing a lawn in non-commercial applications. Any use not in accordance
with this designated use shall be regarded as misuse.
Possible misuse
This machine is not suitable for use in public gardens, parks, sports stadiums and in agriculture and
forestry.
Comply with the safety and warning instructions in this documentation and on the product.
Have damaged parts and batteries replaced or repaired by a SOLO dealer, technician or service
partner.
The user is responsible for accidents involving other people and their property.
Keep other people out of the danger area.
Only use the machine if it is in perfect technical condition.
Children, or other people who are not familiar with the operating instructions, are not allowed to use
the machine.
Keep your body and clothing away from the blade system.
WARNING!
Following these warning instructions can help to avoid personal injuries and/or damage to
property.

1.2 Safety and protective devices

Safety devices are not allowed to be bypassed, manipulated or removed. Non-observance can
endanger your own health and other persons.
The evoCUT 4.0 is protected by a PIN code in order to prevent it from being switched on inadvertently
or without authorisation.
The evoCUT 4.0 is equipped with a safety sensor. If the machine is lifted up, its motor and cutting
blades are stopped within 2 seconds.
After contact with an obstacle, the evoCUT 4.0 moves back, stops and changes its direction of travel.
Regularly check the machine and base station for damage.
Do not use a damaged machine or base station.

2. SCOPE OF SUPPLY

Fig. 1
A evoCUT 4.0 mower
B Base station
C Transformer
D Boundary cable (250 m)
E Lawn pegs (250 pcs.)
Instruction manual
EC declaration of conformity
on a separate piece of paper
PUK-Code
ENGLISH 4

1. SAFETY REGULATIONS

Fig. 2
1. Charging contacts
2. Bumper
3. Deck
4. Operating panel (under cover flap)
5. STOP key
6. Front rollers (steering)
7. Blade plate
8. Drive wheels
9. Cutting blade
10. Clearer blade
11. Fastening screw

3. PRODUCT OVERVIEW