Control Panel; Pin And Puk Code - Solo evoCUT 4.0 Instructions D'emploi

Fig. 3:
1. The [ LCD display ] displays the current status or the selected menu.
2. Pressing the [ STOP key ] stops the evoCUT 4.0 and the cutting blades within 2 seconds.
3. The [up and down arrow keys] are used for navigating in the menu and for changing values.
4. Press the [ START/PAUSE key ] to start the evoCUT 4.0 or interrupt operation. Caution – The
machine starts automatically after about 2 minutes!
5. [ Multifunction key right ]
Confirm (call up a menu, confirm a change of values)
Next
Change
Activate / deactivate
Store / confirm
6. [ Multifunction key left ]
Cancel
Back (close menu, when entering values, go one value back)
7. The [ ON/OFF key ] is used for switching the evoCUT 4.0 on or off.
8. The [ menu key ] can be used for jumping back to the main menu from any submenu.
9. The [HOME key] cancels the current mowing procedure. The evoCUT 4.0 moves to its base
station. The evoCUT 4.0 starts on the next day, with the next mowing window.
Keep the PIN code and PUK code where they cannot be accessed by unauthorised people.
The PIN code can be changed by the owner.
If the PIN code is entered incorrectly three times, it will be necessary to enter a PUK code.
If an incorrect PUK code is entered several times, it is necessary to wait 24 hours before a new entry
can be made.

6. CONTROL PANEL

7. PIN AND PUK CODE

CONTROL PANEL, PIN AND PUK CODE
ENGLISH 7