Lenze 8200 Motec Instructions De Montage page 80

All manuals and user guides at all-guides.com
Wall mounting
3
Motor connection
8200mot168
HF shield connection by PE connection to the shield ( ¶ 17 ) or motor EMC connection.
PES
X2/T1, Connection terminals motor temperature monitoring with PTC thermistor or thermal contact (NC
X2/T2 contact).
Activate motor temperature monitoring with C0119 (e. g. C0119 = 1)!
Danger!
All control terminals only have a basic insulation (single isolating distance) after the
l
connection of a PTC thermistor or thermostat.
Protection against contact - in the event of a defective isolating distance - can only
l
be ensured by external measures, e.g. double insulation.
16
X2 T1 T2 PE W
PES
PES
PE
PTC
EDK82MV222 DE/EN/FR 3.0
V U
PES
J>
PES
M
3~
M
3~
22
L