Extended Functions; Hold Function - Soehnle Professional 7700 Mode D'emploi

ENGLISH
BMI classification (as per DGE - German Society for Nutrition, Nutrition Report 1992)
Classification
Underweight
Normal weight
Overweight
Adiposity
Severe adiposity
18

Extended functions

The key can be programmed with the following
functions: Hold, unit switch-over, BMI and special
Dialysis function. The standard function programmed
is BMI. You can make changes in User mode
(p. 19/20).
• Press the function key
• Display, e.g. 170 = body height in cm
• Body height > 170cm: Press
height is correct.
• Body height < 170cm: Press
height is correct.
• Confirm by pressing
• Display switches to weighing mode 0.00 kg.
• Weighing.
• After the scales have stopped moving, the display
shows the BMI and weight alternately.
< 20
20 - 25
25 - 30
30 - 40
> 40
Special dialysis function (intermediate tare)
If this function is set, the operator may give the
patient a blanket or a book or remove them without
affecting the weight reading.
Press the key. "Hold" appears in the display. Give
or take back book and press
weight reading will be displayed without Hold but with
"N". The reading is now a net weight. The tare is sto-
red in the tare memory.

Hold function

When this mode is active, press the
flashes until the value is determined and frozen.
These 6 modes are settable in User mode:
Mode
Manual
At a standstill outside
the zero range
Automatic
Slave pointer,
manual
For weight increase
and repeated standstill
Slave pointer,
automatic
Maximum value,
of the maximum
manual
weight reached
Maximum value,
(without being at a standstill)
automatic
.
key until body
key until body
.
< 19
19 -24
24 -30
30 - 40
> 40
again. Previous
key. "Hold"
Hold Remove by pressing
Remove load from scale
Remove load from scale
Remove load from scale
key
key
key