Date Time; Brightness - Tunturi Pure Cross R 10.1 Mode D'emploi

In Network notification function you
can choose to show available networks
when check box is checked or hide the
available networks when un checked.
Wi-Fi networks:
Lists the available networks.
It shows authentication and signal
strength sign.
Press the network you like to connect to
once to open the connection window
Touch the Password bar and the
software keyboard will appear
automatically. Enter the pass word
and press connect button to establish
connection.
Use "Add Wi-Fi network" button, always
on the bottom of your list to add a
network when SSID is hidden. You
might need to swipe to the bottom of the
list when many available networks are
listed.
Touch the Network SSID bar and
the software keyboard will appear
automatically.
• Enter the network name
• Select Security mode
• Fill out Password
and press connect button to establish
connection.
22
Remark:
to establish a Wi-Fi connection it might
be required to set date and time correct.

Date Time

When pressing "Date Time" button it
opens Date Time settings window.
In here you can set date and time
correct. You can also set correct time
zone if required.
Use arrow up or down buttons to adjust.
Press OK button to confirm, and go back
to setting menu.
Press Back button to go back to settings
menu without change.

Brightness

When pressing "brightness" button it
opens brightness settings window.
In here you can adjust brightness in
range between 0 (darker) and 100
(lighter).
Use arrow up or down buttons to adjust..
Press OK button to confirm, and go back
to setting menu.
Press Back button to go back to settings
menu without change.