Scenery Tour; Heart Rate Control - Tunturi Pure Cross R 10.1 Mode D'emploi

Scenery Tour

"Scenery Tour" uses the same workout
profiles as in "Workout Trip", except it
has the video playback. The video was
recorded the scene in the local site. The
video playback speed will be adjusted
automatically depends on treadmill
speed: The programs contain real
geometric data, like position, altitude,
and incline. Therefore, these programs
only contain preset incline. The default
speed is 0.8 KM/h. However, user still
could adjust NM when running. There
are 3 preset programs:
A: Tuscany Country road
B: Tuscany Sandy Track
C: Tuscany Scenery Slopes
Select your program and the goal
selection window appears. Set your work
out goal to start your selected program.
You will see below program profile.
You can use the arrows in left lower
corner at all times to adjust your workout
intensity.
Owner's manual • Pure 10.1

Heart Rate Control

The "Heart Rate Control" programs are
designed to control user heart rate by
resistance adjustments. So, heart rate
transmitter is required for the workout.
There are 6 preset programs
A: HRC
B: P06 Fat Burner 1
C: P07 Fat Burner 2
D: P08 Cardio Strength
E: P09 Cardio Climb
F: P10 Cardio Interval
Select your program and the goal
selection window appears. Set your work
out goal to start your selected program.
You will see below program profile.
Chart display shows:
• Y-Axis left side: Heart rate ( BMP)
• Y-axis.right side: Target heart rate
• X-axis: Distance when in distance
mode. Time when in time mode
Window size is 2KM for distance unit
and 10 Min for time unit.
You can use the arrows in left lower
corner at all times to adjust your heart
rate goal.
GB
15