Tunturi Pure Cross R 10.1 Mode D'emploi page 7

shaft through the opening in the tube.
Push the right arm on the shaft and
lock it by tightening a large washer,
and a screw to the both ends of the
shaft. Tighten the arms using two
Allen keys.
Remark:
A think shim washer is in between both
swivel arms and front frame tube..
• Fix the bottle holder to the upright
tube.
Assembly step E
• Fix pedal tube to lower arms as
shown in picture.
Assembly step F
• Fix upper moving handle bars as
shown in picture.
Owner's manual • Pure 10.1
Assembly step G
• Fix both foot rests to the pedal tubes
as shown in picture.
Remark:
There are two horizontal positions you
can fix the foot rests too. Make sure you
use same fittings for left and right foot
rest always.
Assembly step H
• Fix both fixed handle bar tubes as
shown in picture.
Remark:
First put all screws/ bolts in correct place
before tightening them fully.
GB
7