Section 2.0 General Description And Intended Use; Specifications; Footswitch - Gyrus Acmi CyberWand CW-USLS Mode D'emploi

6
Section 2.0 General Description and Intended Use
The Gyrus ACMI CyberWand Ultrasonic Lithotripsy System is an electromechanical device capable of
fragmenting calculi and aspirating stone debris. It is classified as Class 1 equipment with a Type BF
applied part, per IEC 60601-1. This product conforms to EU Council Directive 93142/EEC for medical
devices.
The CyberWand Ultrasonic Lithotripsy System is intended to be used to fragment urinary tract calculi
in the kidney, ureter, and bladder.
The following items are included in the CyberWand System:
REF Description
CW-USLS CyberWand Dual Ultrasonic Lithotripsy System: Includes Generator, Transducer, Footswitch,
Power Cord, 2 Renal/Bladder probe sets, Wrench and Cleaning Stylet (Cleaning rod)
CW-USLG Generator (100 ~ 240 VAC)
CW-USLT Transducer (Hand piece)
CW- USLRBP Renal/Bladder Probe Sets (2) 3.8 mm
CW-USLFS

Footswitch

CW-USLPC Power Cord
CW-USLW Wrench
CW-USLCS Cleaning Stylet
NOTE: The above items can also be ordered separately from Gyrus ACMI.
2.1

Specifications

Generator
Power supply Voltage
Frequency
Physical Dimensions
Weight
Classification (Electro-Medical) Protection against electric shock
Type of applied part
Ultrasonic Energy Frequency
Maximum output
Footswitch
Physical Specifications Dimension
Weight
Length of Cord
Classification Degree of water resistance
Transducer
Housing Dimensions Diameter
Length
Weight
Cable Length
Sterilization Steam or Ethylene Oxide
100 ~ 240 VAC
50/60 Hz
31x 12x 28 cm W x H x D
6 kg
Class I
Type BF
21 kHz±1 kHz
100 W
20 x 4 x 15 cm W x H x D
3.18 kg, 7lbs
3 m
IPX8 watertight type
(except plug)
4 cm
17 cm
300 g
3 m
80834 REV ED