Télécharger Imprimer la page

Cross Tools CKS 1200 V Traduction Du Mode D'emploi D'origine page 34

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 49
Gerätebeschreibung für CKS 1900 V:
5.1.
Installation of the guide bar and saw chain
A standard saw unit package contains the items as illustrated:
1. Power unit
2. Bar protector
3. Guide bar
4. Saw chain
5. Plug wrench
6. Screwdriver for carburetor adjustment
7. Rear handle
8. Throttle lock
9. Throttle lever
10. Front handle
11. Front hand protection / chain brake lever
Open the box and install the guide bar and the saw chain on the power unit as follows:
ATTENTION: The saw chain has very sharp edges. Use thick protective gloves for safety.
1. Pull the guard towards the front handle to check
that the chain brake is not engaged.
2. Die Mutternlösen und die
Kettenabdeckung entfernen.
(1) Chaincover
(2) Chain Tensioner nut
3. Gear the chain to the sprocket and, while fitting the saw chain around the guide bar,
mount the guide bar to the power unit. Adjust the position of chain tensioner nut. Make
sure that the driving links of the chain lie exactly in the guide of the drive pinion.
NOTE: Pay attention to the correct direction of the saw chain.
32
(1) Moving direction
8
Translation of original operating instructions
(8)
(7)
(9)
(10
)
(11)

Publicité

loading

Ce manuel est également adapté pour:

Cks 1900 v