Process Mounting - Burkert SE35 Notice D'utilisation

3 INSTALLATION

3.2 Process mounting

The flow controller electronic module SE35 Batch INLINE can be easily installed in pipes
using the specially designed fitting system S030 INLINE.
1.The fitting 1 must be installed into the
pipe according to the installation
specifications (see § 3.1).
2. Fasten the electronic
housing 2 to the
fitting using
bayonet connection,
and turn by 30°.
3. Tighten the electronic housing
with the screw 4.
Fig. 3 Batch controller type 8035 INLINE Batch mounting diagram
the
BATCH CONTROLLER SE35
E-8-
Wiring instructions § 3.4
8035