Safety Information - Risks For Children; Package Contents; Technical Data; Intended Use - Crivit 327402 1904 Notice D'utilisation

Congratulations!
You have chosen to purchase a high-quality
product. Familiarise yourself with the product
before using it for the first time.
Read the following operating
instructions carefully.
Use the product only as described and only
for the given areas of application. Store these
operating instructions carefully. When passing
the product on to third parties, please also hand
over all accompanying documents.
Safety information –
risks for children
• This apparatus may be used by
children from 8 years of age
upwards, as well by persons with
diminished physical, sensory or
mental abilities, or those with little
experience and knowledge, if they
are supervised or instructed with
regard to its safe use, provided
they also understand potential
risks.
• Children may not play with the
apparatus.
• Cleaning and maintenance may
not be carried out by children
without supervision.
Package contents (Fig. A)
1 x mini stepper
2 x strap with handle
2 x plastic foot with support surfaces
2 x self-tapping screw
1 x adjusting screw
1 x Allen key with Phillips screwdriver
1 x battery (1.5V LR03, AAA)
1 x operating instructions

Technical data

Measurements: approx. 52 x 24.5 x 52cm
(W x H x D)
Weight: approx. 9.050kg
Energy supply:
1 x 1.5V LR03, AAA
Rated power consumption: 0.09mW
Symbol for DC voltage
Maximum load: 100kg
Delta-Sport Handelskontor GmbH
hereby declares that this product
complies with the following basic requirements
as well as other relevant statutory provisions:
2014/30/EU – EMC Directive
2011/65/EU – RoHS Directive
Full declarations of conformity are available
under
http://www.conformity.delta-sport.com/
Date of manufacture (month/year):
09/2019
Device class: HC (for use in private households,
exactitude C)/not intended for therapeutic
training
Tested according to: DIN EN ISO 20957-1:
2014, DIN EN ISO 20957-8,
Training device DIN 32935 – A
Maximum stretch length 165cm at 19.5N.
The tolerance range for the force is max. 20% (+/-).
Training appliance form A is compliant with
DIN 32935.
Stepping motion
The stepper facilitates a stepper-determined
stepping motion.
Brake resistance system
The stepper uses a speed-dependent system.

Intended use

The item is intended to be used exclusively
as training equipment, and is approved for
installation and use in the home only.
GB/IE 21