Frame; Wheels; Tyres; Suspensions - Ducati MONSTER 620 Manuel D'utilisation Et Entretien

Frame

Tubular trestle frame with upper section made of high-
strength steel.
Steering angle (on each side):
27°
Steering head angle:
24°
Trail mm:
96
E

Wheels

Three-spoke, light-alloy rims.
Front
Make:
BREMBO
Dimensions:
MT3.50x17"
Rear
Make:
BREMBO
Dimensions:
MT4.50x17"
Both wheel shafts can be removed.

Tyres

Front
Tubeless, radial tyre.
Size:
120/60-ZR17
66
Rear
Tubeless, radial tyre.
Size:
160/60-ZR17

Suspensions

Front
Hydraulic upside-down fork.
Stanchion tubes diameter: 43 mm.
Travel on leg axis: 130 mm.
Rear
Of the progressive type, thanks to a rocker arm connecting
frame and upper pivot point of the shock absorber. The
shock absorber features rebound damping and spring
preload adjustment. Its bottom end pivots on a swingarm
in steel or aluminium.
The swingarm hinges on a pivot pin passing through the
engine. The whole system gives the bike excellent
stability.
Shock absorber stroke: 65 mm.
Rear wheel travel: 148 mm.
Note
Homologation depends on certain technical
specifications, do not perform any service operation that
might change them.