Table des Matières
Publicité
Installing the Refrigerant Pipe Work
Please fill in the following with indelible ink on the
refrigerant charge label supplied with this product and
on this manual.
Outdoor Unit of Liquid
R410A
– GWP=Global Warming Potential
– Calculating tCO₂e : kg x GWP / 1000
Indoor unit
Unit
, a
, b
+ , C
•
the factory refrigerant charge of the product.
•
the additional refrigerant amount charged in the
field.
•
+
the total refrigerant charge.
The refrigerant charge label supplied with the product.
26
English
Additional charging (g)
2088
d
kg
tCO₂e
NOTE
• Factory refrigerant charge of the product :
see unit name plate.
• Additional refrigerant amount charged in the
field. (Refer to the above information for the
quantity of refrigerant replenishment.)
• Total refrigerant charge.
• Refrigerant cylinder and manifold for charging.
CAUTION
• The filled-out label must be adhered in the
proximity of the product charging port. (ex. onto
the inside of the stop valve cover.)
• Before charging, check whether the refrigerant
cylinder has a siphon attached or not and position the
cylinder accordingly.
Charging using a
cylinder with a
siphon attached
Charge the liquid
refrigerantwith the
cylinder in upright
position.
Charging using a
cylinder without a
siphon attached
Charge the liquid
refrigerant with the
cylinder in up-side-
down position.
Publicité
Table des Matières
