Maintenance; Cleaning; Error Messages - Burkert 8311 Manuel D'installation

6

maintenance

type of description
message
1 ERR The data saved following a power
supply cut-off is lost.
Read and/or write error: the process
is stopped.
2 ERR The parameters of the Calibration
menu cannot be read and/or saved.
Read and/or write error: the process
is stopped.
3 ERR The parameters of the Test menu can-
not be read and/or saved.
Read and/or write error: the process
is stopped.

6.1 cleaning

The transmitter 8311 can be cleaned with water or any solution compa-
tible with the materials the device is made of.
For more information, please contact your Bürkert sales office.

6.2 error messages

to do
Press the ENTER key to go back to the Normal mode.
If the message appears frequently, send the device back to your
Bürkert sales office.
Press the ENTER key to go back to the Normal mode.
The device operates with the default parameters: the Calibration
parameters must be programmed again.
If the message appears frequently, send the device back to your
Bürkert sales office.
Press the ENTER key to go back to the Normal mode.
The device operates with the default parameters: the Test parame-
ters must be programmed again.
If the message appears frequently, send the device back to your
Bürkert sales office.
Pressure transmitter 8311