Utilisation - Burkert 8311 Manuel D'installation

8311

1.1 utilisation

- The 8311 transmitter has only been designed to measure the relative
pressure of a liquid or a gas.
- The following units are available to display the measured pressure: bar,
mbar, psi, atm, kPa, MPa, MH
When using an absolute pressure unit (mmHg, atm, mH
aware that the air pressure displacement (about 1013 mbar) is
not taken into account by the device.
- The measuring element must be solidly screwed onto its support.
There will be no manufacturer warranty for damages caused by unexpec-
ted handling or wrong usage of the device. The warranty on the device
becomes invalid if any modification or change is made on the device.
the device should only be installed and repaired by specia-
list staff. if any difficulties may occur with the product during
installation, please contact your nearest Bürkert sales office for
assistance.
O, mmHg.
2

o), be
2