Description; Design; Measuring Principle - Burkert 8311 Manuel D'installation

2

descriPtion

2.1 design

The pressure transmitter 8311-2 wires is made up of an electronic mo-
dule and a measuring element. It may switch a solenoid valve, activate an
alarm or establish a control loop.
The adjustments can be carried out by means of the three keys located
under the display.
The transmitter housing can be turned by 180°.
The transmitter 8311 can be inserted in a fitting before being mounted on
any type of pipe.
The electrical connection is carried out via an EN175301-803 connector
and/or a steerable M12 multipin connector.

2.2 measuring principle

The transmitter 8311 uses a piezo-resistive ceramic cell.
the cell and the electronic board are calibrated together ex
works; do not use one of these elements with another transmit-
ter.
8311