Maintenance And Troubleshooting - Burkert 8222 ELEMENT neutrino Manuel Utilisateur

Transmetteur de conductivité
Masquer les pouces Voir aussi pour 8222 ELEMENT neutrino:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Type 8222 ELEMENT neutrino
Maintenanceandtroubleshooting
11.
MAiNTENANcE ANd
TRoubLEshooTiNG
11.1.
safety instructions
danger
Risk of injury due to high pressure in the installation.
Stop the circulation of fluid and release the pressure before
loosening the connections.
Risk of injury due to electrical discharge.
Shut down and isolate the electrical power source before
carrying out work on the system.
Observe all applicable accident protection and safety regula-
tions for electrical equipment.
Risk of injury due to high fluid temperatures.
Use safety gloves to handle the device.
Risk of injury due to the nature of the fluid.
Respect the prevailing regulations on accident prevention and
safety relating to the use of aggressive fluids.
Warning
Risk of injury due to nonconforming maintenance.
Maintenance must only be carried out by qualified and skilled
staff with the appropriate tools.
Ensure that the restart of the installation is controlled after any
interventions.
All manuals and user guides at all-guides.com
english
11.2.
Transmitter and conductivity
sensor maintenance
During cleaning of the sensor, take care not to scratch its
surface.
Store the sensor dry .
The neutrino transmitter 8222 can be cleaned with water or using a
detergent compatible with the materials it is made of.
Regularly check if the conductivity sensor is dirty; clean it if
necessary using a compatible product.
Please feel free to contact your Bürkert supplier for any additional
information.
11.3.
Replacing the cover seal on the
connection box
Using a screwdriver
with a suitable head,
turn the latch to the
u n l o c k p o s i t i o n
t o u n l o c k t h e
connection box.
31

Publicité

Table des Matières
loading

Table des Matières