Maintenance And Environmental Protection; Service Instructions - Meister basic BKB 135 E Traduction Du Manuel D'utilisation Original

5400630-Kleinbohrm-man 24.01.14 11:50 Seite 42
ATTENTION! Besides the tools
supplied with the machine, a
wide variety of additional tools in
many sizes can also be purchased.
11 – Maintenance and
environmental
protection
Replacing the carbon brushes
Decreasing power of the mini drilling
machine indicates that the carbon
brushes must be exchanged.
ATTENTION! Carbon brushes
must always be replaced in pairs
by a specialist!
ATTENTION! Disconnect the
machine from the mains prior to
removing any coverings of electrical
parts!
Clean the housing and drill chuck with a
damp cloth and then dry well. Do not
use solvents!
Noise reduction
The following factors may cause
excessive noise and can be corrected
by appropriate maintenance:
• dirty, bent or blunt insert tools,
• blocked air vents in the machine
• insecurely fastened machine parts.
CAUTION! Electrical
and battery operated
units that no longer work
should not be disposed of
in the household waste!
They are to be collected
42
separately, in accordance
All manuals and user guides at all-guides.com
with the 2012/19 EU directive for the
disposal of electrical and electronic
waste, and sent for proper and environ -
mentally-friendly recycling.
Please discard power tools no longer
usable at a local collection point.
Collection and disposal of packaging
materials separately by types complying
with local rules and regulations. For
details, please contact your municipal
authority concerned.
12 – Service instructions
• Store the machine, operating
instructions and where necessary the
accessories in the original packaging.
In this way you will always have all the
information and parts ready to hand.
• Meisterbasic devices are to a large
extent maintenancefree, a damp cloth
being sufficient to clean the casing.
Do not drop electrical machines in
water. Please note additional hints
given in the operating instructions.
• Meisterbasic devices are subject to
stringent quality control. If however a
functional fault shoult occur, send the
device to our servicing address. The
repairs will be carried out in a short time.
• A brief description of the defect
speeds up the faulttracing and repair
time. If within the guarantee period,
please enclose the guarantee
document and the proof of purchase.
• In so far as a repair under guarantee
is not concerned, we will charge the
repair costs to your account.
PLEASE NOTE! Opening of the
device invalidates the guarantee
claim.