Mode Of Operation; Maintenance And Environmental Protection; Service Instructions - Meister SB500M Traduction Du Manuel D'utilisation Original

5402020-Schlagbohr_man 11.12.14 09:17 Seite 40
IMPORTANT! Always switch the
motor on before contacting the
material.
Switching on
Press the On-Off switch (4) carefully.
The machine starts. The number of revs
per minute varies according to the
pressure on the switch.
Switching off
Release the On-Off switch and wait until
the machine stops.
Switching on continuous mode
Press the On-Off switch and hold. Press
the locking button (2). Release the On-
Off switch. The machine runs at the
speed selected.
Switching off continuous mode
Press the On-Off switch. The locking
button unlocks. Release the On-Off
switch and wait until the machine stops.
9 – Mode of operation
Drilling in wood and metal
Never use the impact feature when
drilling in wood or metal. The impact
drilling switch must be positioned on
"Drilling". The reversing switch must be
set to "Forward". The speed is
controlled by pressing the trigger.
Preselection of speed (5).
Drilling in cement
Set the hammer switch to the "On"
setting, and the right/left directional
switch to "Right". Start with low
40
revolutions.
All manuals and user guides at all-guides.com
10 – Maintenance and
environmental
protection
Clean the housing only with a damp
cloth – do not use any solvents! Dry
thoroughly afterwards.
CAUTION! Electrical and battery
operated units that no longer work
should not be disposed of in the
household waste! They are to be
collected separately, in accordance
with the 2012/19/EU
directive for the disposal of
electrical and electronic
waste, and sent for proper
and environ mentally-
friendly recycling.
Please discard power tools no longer
usable at a local collection point.
Collection and disposal of packaging
materials separately by types complying
with local rules and regulations. For
details, please contact your municipal
authority concerned.
11 – Service instructions
• Store the machine, operating
instructions and where necessary the
accessories in the original packaging.
In this way you will always have all
the information and parts ready to
hand.
• Meister devices are to a large extent
maintenancefree, a damp cloth being
sufficient to clean the casing. Do not
drop electrical machines in water.
Please note additional hints given in
the operating instructions.
• Meister devices are subject to stringent
quality control. If however a functional
fault shoult occur, send the device to