System Settings; Delete Settings; Restore Factory Settings - Comelit AHPTZ110A Mode D'emploi

1.4.1 Presets lock
The preset point lock can be turned on or off , default is off. When the preset point lock is
set to open, the preset point cannot be set by keyboard. When the preset point is open, the
preset point is set by keyboard, and the screen will prompt "the preset point lock on".
1.4.2 Enable password
Enable password can be turned on or off , default is off.

1.5 System settings

In the menu of Figure 1-0-1, move the rocker up and down so that the cursor points to
the system settings, and then move the rocker to the right to enter the system settings menu
(Figure 1-5-1):
System settings

Delete settings

System restart

Restore factory settings

Back
Exit
Figure 1-5-1
1.5.1 Delete settings
In Figure 1-5-1, move the rocker up and down so that the cursor points to the delete
settings, and then move the rocker to the right to enter the delete settings menu, as shown in
Figure 1-5-3.
Delete settings
Delete all privacy mask
Delete all presets
Delete all linear scans
Delete all cruise scans
Delete all pattern scans
Delete all group scans
Delete all continuous scans
Delete all alarm settings
Next screen
Figure 1-5-3
Delete settings → (Figure 1-5-2)
Delete settings
Delete all timing settings
Back
Exit
25