Comelit AHPTZ110A Mode D'emploi page 13

Group scan settings
No.
编辑群组 →（图 1-2-12）
Edit groups
Calling groups
Delete current
Back
Exit
Figure 1-2-11
I No.: 1-4 optional. PTZ camera can set 4 groups group scan.
II In Figure 1-2-11, move the rocker up and down so that the cursor points to the editing
group, and then move the rocker to the right to enter the editing group interface, as shown
in Figure 1-2-12.
Type No.
1 Presets 0
2 Presets 1
3 Presets 2
4 Presets 3
5 Presets 4
6 Presets 5
7 No action ---
8 No action ---
9 No action ---
Next screen
Description: 16 scan members can be selected for each group. Each group can realize
any combination of presets, linear scan, cruise scan and pattern scan. By adding all kinds of
scans to the group list in order, can be monitored according to the scan type in the group list.
Edit the "types" in the group interface: including presets, linear scans, cruise scan and pattern
scan. "No." refers to number scan of the corresponding selected type. "Time" refers to the
running interval of two scans, with an option of 1-255 seconds.
Operational instructions: in the editing group interface, move the cursor up and down to
select the Scan number needed, Move the rocket to the left to exit without to save. When the
cursor is at the type selection item, move the rocker to the right to select the no. item. Move
the rocker up and down to select the type no. When the cursor is at the type selection item,
move the rocker to the right to select the time interval between two scans. Move the rocker up
1
Time
1S
1S
1S
1S
1S
1S
---
---
---
Figure 1-2-12
Type
10 No action
11 No action
12 No action
13 linear scan
14 Cruise scan
15 Pattern scan
16 linear scan
Back
Exit
No. Time
--- ---
--- ---
--- ---
2 1S
2 1S
3 1S
3 1S
13