Comelit AHPTZ110A Mode D'emploi page 16

points to the idle action settings, and then move the rocker to the right to enter the idle
③ action settings menu. As shown in figure 1-2-16.
Idle action settings
Time
Action type
Action No.
Back
Exit
Figure 1-2-16
I Time: set idle action time, the time can be selected: 1-720 mins. The default idle time is
one minute.
II Action type: this option is to set the type of idle action. Presets, linear scan, cruise scan,
pattern scan, group scan, continuous scan and interval scan optional, default is no action.
The PTZ camera executes idle actions without receiving valid commands during the set
idle time.
III Action No.: this item selects the number of the action type for the above action type.
When the selected item is "---", the current action type has no optional number, that is, the
current action number cannot be set.
③ Speed Limit: also known as proportional variation .On or off, default is on. When set to
turn on, the PTZ camera automatically adjusts the horizontal and vertical rotational
speed of the camera according to the distance of the focal length, which makes it easier
to track the target manually.
④ Automatic flip function: on or off, default is on. When set to open, the operator pulls the
lens to the bottom (vertical) and then holds the rocker. At this time, the lens
automatically rotates 180 degrees horizontally and then flips 90 degrees upward. It can
directly see the scenery on the back, thus realizing the continuous monitoring of 180
degrees longitudinally.
⑤ Horizontal reverse: on or off, default is off. When set to open, the rocker left and right
movement command will carry out direction processing, that is, the original right
movement command will become the left movement command, and the left movement
command will become the right movement command.
⑥ Vertical reverse: on or off, default is off. When set to open, the rocker up and down
movement command will carry out direction processing, that is to say, the original
rocker up movement command will become the down movement command, and the
1M
No action
1
16