Comelit AHPTZ110A Mode D'emploi page 3


Non-professional do not disassemble the PTZ camera. Please read this
manual carefully before operating. (This specification is subject to change
without prior notice.)

Cut the power supply off before operating the device to avoid damage caused
by mis-operation.

Interior of the PTZ camera are precision optical and electrical instruments.
Heavy pressure, shock and other incorrect operations should be prevented.
Otherwise, may cause damage to product.

Please do not use the product under circumstances where the limits exceed
the maximum specified temperature, humidity or power supply specifications.

Contents in this manual may be different from the edition that you are using.
Should any unsolved problem occur given that the product is used according
to this manual, please contact our technical support department or your
product suppliers.

This manual content will be updated unscheduled, our company reserves the
right to do manual contents update without further notice.

The default factory address code is No. 1. The automatic recognition
communication protocols are PELCO-D and PELCO-P. The automatic
recognition baud rate are 2400 bps, 4800 bps, 9600 BPS and 19200 bps.
Cautions
3