Comelit AHPTZ110A Mode D'emploi page 9

④ Presets display: on and off optional, default is off. When set to turn on, the PTZ camera
displays the name of the current preset point when running the preset point.
⑤ Privacy mask settings :default is off, calling the menu, go into the menu interface, open
the privacy mask block, set the size of the privacy mask block, click zoom +-, focus +-.
⑥ Back: returns the interface for setting privacy masks.
⑦
Exit: close the interface for setting privacy masks.
1-2-3 Intelligent scan settings
In Figure 1-2-1, move the rocker up and down so that the cursor points to the intelligent
scan settings, and then move the rocker to the right to enter the intelligent scan settings menu.
As shown in Figure 1-2-3.
Intelligent scan settings
Linear scan settings
Cruise scan settings
Pattern scan settings
Group scan settings
Continuous scan settings
Back
Exit
Figure 1-2-3
① Linear scan settings: in Figure 1-2-7, move the rocker up and down so that the cursor
points to linear scan settings, and then move the rocker to the right to enter the linear
scan settings menu, as shown in Figure 1-2-7.
L
inear scan settings
No.
Set linear scan
Speed
Range selection
Calling linear scan
Delete current
Back
Exit
Figure1-2-7
I No.:1-8 optional, PTZ camera can set 8 groups linear scan.
II In the menu of Figure 1-2-7, move the rocker up and down so that the cursor points to
set linear scan, and then move the rocker to the right to set linear scan state. The rocker
Linear scan settings → (Figure 1-2-7)
Cruise scan settings → (Figure 1-2-8)
Pattern scan settings → (Figure 1-2-10)
Group scan settings → (Figure 1-2-11)
Continuous scan settings → (Figure 1-2-13)
1
9
Large radian
9