Ptz Settings; Display Settings; Intelligent Scan Settings; Control Settings - Comelit AHPTZ110A Mode D'emploi

1.2 PTZ settings

In the menu of Figure 1-0-1, move the rocker up and down to point the cursor at PTZ
settings, and then move the rocker to the right to enter PTZ settings menu, as shown in
Figure 1-2-1.
PTZ settings

Display settings

Intelligent scan settings

Control settings

PTZ camera address settings

Alarm settings

IR light settings
Back
Figure 1-2-1
1-2-2 Display settings
In the menu of Figure 1-2-1, move the rocker up and down so that the cursor points to
the display settings, and then move the rocker to the right to enter the display settings menu.
As shown in figure 1-2-2.
Display settings
Boot information display
PTZ camera function display
PTZ camera coordinate display Off
Presets display
Privacy mask settings
Back
Exit
Figure 1-2-2
① Boot information display: on and off optional, default is on. When set to turn on, when
the PTZ camera is powered on, the boot information is displayed.
返回
② PTZ camera function display: on and off optional, default is off. When set to turn on, the
退出
PTZ camera displays the type and number of the current scan when it is running.
③ PTZ camera coordinate display: on and off optional, default is on. When set to turn on,
the screen displays the horizontal and vertical position angle of the current PTZ, i.e.
Coordinates
Display settings→ ( Figure 1-2-2)
Intelligent scan settings → (Figure 1-2-3)
Control settings → (Figure 1-2-4)
PTZ camera address settings → (Figure 1-2-5)
Alarm settings→ (Figure 1-2-6)
IR light settings → (Figure 1-2-7)
On
Off
Presets settings → (Figure 1-2-3)
Privacy mask settings → (Figure 1-2-5)
8