Comelit AHPTZ110A Mode D'emploi page 17

down movement command will become the up movement command.
⑦ Manual operation speed: 1-10 level optional, default speed is 10 level. Level 1 is the
lowest speed for manual operation, and level 10 is the highest speed for manual
operation.
1-2-5 PTZ camera address
In Figure 1-2-1, move the rocker up and down so that the cursor points to the PTZ
camera address settings, and then move the rocker to the right to enter the PTZ camera
address settings menu. As shown in Figure 1-2-17.
PTZ camera address settings
Hardware address
Address type
Software address
Back
Exit
Figure 1-2-17
① Hardware address: this item is only to display the current PTZ camera hardware
address
② Address type: hardware and software optional, default is hardware. Software address:
0-255 optional, default is 0.
③ Software address: 0-255 optional, default is 0.
1-2-6 Alarm settings
In Figure 1-2-1, move the rocker up and down so that the cursor points to the alarm
settings, and then move the rocker to the right to enter the alarm settings menu. As shown in
Figure 1-2-18.
Alarm settings
No.
Alarm linkage settings
Input type
open
Output type
open
Alarm output time
Alarm output
Delete current
Back
Exit
0
Hardware Display the current PTZ camera hardware address
0
1
Alarm linkage settings → (Figure 1-2-19)
Normal
Normal
5S
Off
17