Comelit AHPTZ110A Mode D'emploi page 11

II
Presets Speed Time
1 0 9 1S
2 1 9 1S
3 2 9 1S
4 3 9 1S
5 --- - ---
6 5 9 1S
7 6 9 1S
8 7 9 1S
9 8 9 1S
Next screen
Description: 20 preset points can be selected for each group cruise. Each group of
cruises can set the running speed between preset points, the speed can be selected from 1-
10 levels, 1 level is the minimum speed, 10 level is the maximum speed; the running time
interval between preset points can be set, the time interval can be set to 1-255 seconds.
Operation instructions: in the editing cruise interface, move the cursor up and down to
select the Preset point number needed. Move the rocket to the left to exit without to save.
When the cursor is at the Preset point selection item, move the rocker to the right to select the
speed between the preset points. Move the rocker up and down to select the required speed
level. When the cursor is at the desired running speed, move the rocker to the right to select
the time interval between the preset points. Move the rocker up and down to select the
required time interval. Move the rocket to the right to save the settings and exits the selection
status.
III In Figure 1-2-8, move the rocker up and down. When the cursor points to start cruise,
move the rocker to the right to start the cruise scan, and move the rocker arbitrarily to go
back to the cruise scan settings menu.
IV In Figure 1-2-8, move the rocker up and down to the cursor points to delete the
current. Move the rocker to the right to delete the current cruise scan.
Presets Speed Time
10 9 9
11 10 9
12 11 9
13 12 9
14 13 9
15 --- -
16 15 9
17 --- -
18 17 9
Next screen
Figure 1-2-9
1S
1S
1S
1S
1S
---
Presets
1S
19 254
---
20 255
1S
Back
Exit
Speed Time
9 1S
9 1S
11