Comelit AHPTZ110A Mode D'emploi page 6

Operation method
The PTZ camera can be connected with keyboard device through RS485. The camera can
be remotely controlled by moving up and down, moving left and right, and zooming lens.
General functions
4.1 Up and down, left and
Up, down, left and right can be controlled by rocker. The speed of rocker control is
changeable. The bigger the angle of inclination, the faster the speed of movement. The
position diagram of rocker handle is shown in Figure 4-1-1.
Up
Left
Down
Figure 4-1-1
4.2 Lens control
Change the camera's field of view (zoom in and zoom out) press [TELE] or [WIDE].
4.3 Basic operation of main menu
（1）"95+CALL" enters the camera main menu.
（2） The rocker handle moves up and down to see the menu bar pointed by the cursor; the
rocker handle moves right to enter the sub-menu of the item where the cursor is located or to
enter the function of the item where the cursor is located; the rocker handle moves left (or
executes the "Back" menu item) to return to the previous menu.
（3）If the cursor is in the selection state of the current menu item, moving the rocker up or
down can change the current selection, and moving the rocker left or right can exit the current
selection and save the current selection.
（4）If the menu item where the cursor is located has a subordinate menu, press [OPEN] to
enter the subordinate menu.
（5）Press [CLOSE] (or execute the "Exit" menu item) to close the menu.
Tip: The menu structure of the PTZ camera is shown in the menu index.
right moving functions
Right
6