Yamaha YZ450F Manuel D'atelier Du Proprietaire page 634

Masquer les pouces Voir aussi pour YZ450F:

Setting of spring after replacement

After replacement, be sure to adjust the spring

to the set length [sunken length 90 ~ 100 mm

(3.5 ~ 3.9 in)] and set it.

1. Use of soft spring

• Set the soft spring for less rebound

damping to compensate for its less spring

load. Run with the rebound damping

adjuster one or two clicks on the softer

side and readjust it to suit your prefer-

2. Use of stiff spring

• Set the soft spring for more rebound

damping to compensate for its greater

spring load. Run with the rebound damp-

ing adjuster one or two clicks on the

stiffer side and readjust it to suit your

Adjusting the rebound damping will be fol-

lowed more or less by a change in the com-

pression damping. For correction, turn the

low compression damping adjuster on the

softer side.

When using a rear cushion other than cur-

rently installed, use the one whose overall

length a does not exceed the standard as

it may result in faulty performance. Never

use one whose overall length is greater

than standard.

Length a of standard shock:

490.5 mm (19.31 in)

È Coverage of spring by weight

É Rider weight

Chapitres