Operation - marklin Kof II Mode D'emploi

2

Operation

2.2 Setting the Address
and the Running Charac-
teristics Parameters
The address and the running charac-
teristics parameters can be changed
with the 6021 Control Unit, the
Mobile Station, or the Central Station.
If you do not have one of these units,
your authorized Märklin dealer would
be happy to help you.
Parameter
Locomotive address
Minimum speed
Acceleration delay (up to 55 sec.)
Braking delay
Maximum speed
Volume (speaker)
22
How to set the parameters with the
Mobile Station or the Central Station
can be found in the instructions for
these units.
The following settings can be made:
Register Value
01 01 – 80
02 01 – 63
03 01 – 63
04 01 – 63
05 01 – 63
63 01 – 63
01 = soft
63 = loud
2.2.1 Setting the Parameters
with the 6021 Control Unit
To set the parameters, you need a
6021 Control Unit, a transformer, and
a length of track connected to the
Control Unit.
Important: No other locomotives
or cars may be on this programming
track.
Other controllers may remain
connected to the Control Unit.
However, they may not be used
during the following programming
process.
Basic setting: The controllers
are connected, the locomotive
is standing on the programming
track, the system is turned on.