Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2.2 Setting the Mode of
Operation or Digital/Delta
Address
Step 1:
Removing the roof (unscrew whistles,
push the roof back and then remove.
=> Page 39).
The mode of operation or the Digi-
tal/Delta address is set with the 10
coding switches on the digital elec-
tronic circuit.
Caution! Do not confuse the
10 coding switches for the mode
of operation and for the address
on the lower digital circuit board
with the 8 coding switches on the
upper sound effects circuit board!
2.2.1 Setting the Mode of
Operation
Step 2:
The analog mode of operation is set
with switch 10 (designated "0") of the
10 coding switches.
Switch 10 (0) at off: AC current
Switch 10 (0) at on: DC current
The mode of operation for Märklin
Digital or Delta is automatically reco-
gnized by the electronic circuit.
Important:
Switch 9 must always be kept at
the "off" setting.
2.2.2 Setting Digital/Delta
Address
Step 2:
The Digital/Delta address is set with
switches 1 through 8 of the 10
coding switches.
Example: "44" as the desired address
Switch 6, 8:
on position
Switch 1, 2, 3, 4, 5, 7:
off position
2
Operation
Important:
The digital addresses 24, 60, 72,
nd 78 correspond to the four Delta
addresses.
17
Publicité
Table des Matières
