marklin Kof II Mode D'emploi page 27

2
Operation
2.3.4 Operation with the 32 VA
Transformer (AC Power)
1. Adjust the speed with the speed
control knob.
Turn the speed control knob to the
right: Locomotive goes forwards.
The further the speed control knob
is turned, the faster the locomotive
goes.
Turn the speed control knob to the
(maximum to the "0" position):
Locomotive goes slower.
2. To reverse the locomotive, turn the
speed control knob to the left past
the "0" position.
Important: The locomotive must
first come to a full stop, before the
direction of travel can be changed.
The speed control knob must be
turned at least 1/2 second past
the "0" position to ensure reliable
reversing of the locomotive.
28
3. The headlights and the cab
lighting are turned on when there
is sufficient voltage present. All the
other auxiliary functions remain off.
2.3.4 Operation with DC Power
Requirements for DC power pack:
1. Maximum output voltage:
18 volts DC (filtered DC voltage,
no pulse current!).
2. Direction reversing by means of
changing polarity.
3. Minimum power output: 10 VA.
4. Only power packs approved for
toy operation may be used.
The instructions for the DC power
pack will show you how to operate it.