marklin Kof II Mode D'emploi page 20

2.1 Function
This locomotive has a built-in
multi-train electronic circuit and
offers these features:
• Optional operation with DC power
(max. +/– 18 volts DC), AC power
(with Märklin 32 VA transformer),
with Märklin Delta (only with the
6607 Delta Station), Märklin Digital
(only with the Control Unit), or
Märklin Systems (Mobile Station,
Central Station).
• The mode of operation is auto-
matically recognized.
• 80 multi-train addresses
(4 of them for the Delta System)
can be set. Address that set at
the factory: 42.
• Adjustable operating characteristics
parameters (speed at the smallest
speed level, speed at the highest
speed level, acceleration delay,
braking delay). Either the Control
Unit, the Mobile Station, or the
Central Station are required to set
the operating characteristics para-
meters.
• Märklin claw couplers front and
rear that can be replaced with the
reproduction prototype couplers
included with this locomotive.
When the reproduction prototype
couplers are mounted on the loco-
motive, you must have curves with
a radius greater than 3 meters or
188 inches. With the claw coup-
lers you can use curves with a
radius of 600 mm or 23-5/8".
• The model is designed for operation
on Märklin 1 Gauge track. As the
consumer you assume the risk for
operating on other makes of track.
Only in operation with the
Control Unit, the Mobile Station,
or the Central Station:
• Controllable headlights that change
over with the direction of travel.
• Controllable locomotive operating
sounds.
• Controllable cab lighting.
• Controllable sound effect for a horn.
2
Operation
• Minimizing of the acceleration and
braking delay (switching range)
that has been set for the locomotive.
Except for the headlights and the
cab lighting, all of the functions are
off in the modes of operation for
DC power, AC power, and Märklin
Delta.
21