marklin Kof II Mode D'emploi page 25

2
Operation
2.3 Operating with the
Different Power Systems
This model is designed for optional
operation with Märklin Systems
(Mobile Station or Central Station),
Märklin Digital (only with the Control
Unit as a central unit), Märklin Delta
(only with the 6607 Delta Station),
AC power (only with the 32 VA
Märklin transformer), or DC power
(power pack with a maximum voltage
of +/– 18 volts DC). Damages caused
by operating the locomotive with
another operating system will be
viewed as taking place in a non-
authorized operating status and
therefore are not covered by the
manufacturer's warranty. The con-
sumer assumes all responsibility for
damages resulting from this situation.
26
2.3.1 Operating with the Mobile
Station / Central Station
Please read the instructions for the
Mobile Station or Central Station to
enter this locomotive into the loco-
motive list. Please use the item
number for this locomotive (55742)
to call it up from the database.
The following auxiliary functions are
available on this locomotive:
• Turning headlights on/off that
change over with the direction
of travel.
• Turning the cab lighting on/off.
• Turning locomotive operating
sounds (motor, auxiliary appliances,
etc.) on/off.
• Turning the sound of a horn on/off.
• Minimizing the acceleration /
braking delay.
Controlling the Locomotive:
1. Select the locomotive from the
locomotive list.
2. Turn the speed control knob to
the right: Locomotive goes faster.
Turn the speed control knob to
the left: Locomotive goes slower.
The speed that has been set can
be recognized by the length of the
bar in the speed display.
Press down on the speed control
knob: Locomotive changes direc-
tion.
Important: The locomotive must
first come to a full stop, before the
direction of travel can be changed.
Important: The direction indicator
in the display changes when the
locomotive changes direction.
2.3.2 Digital Locomotive Operation
with the 6021 Control Unit
Requirement: The 4 coding switches
on the back of the Control Unit must
be set as follows.
Switch: 1 2 3
Setting: Off On Off
or
Switch: 1 2 3
Setting: On On On
4
Off
4
Off